Diesel

The fuel that truly cares for the engine and our environment

BHPetrol goes all the way to treat Infiniti Euro5 Diesel at the maximum treat rate so it removes both new (Keep Clean) and existing deposits (Clean Up). This ensures that the engine remains clean and operates at its full efficiency as designed by OEMs.

An independent DW10 CEC F 98-08 Laboratory Test show that modern diesel engines running on unadditivised diesel experience 6.2% power loss after about 25 hours of running time. When the fuel is treated with the new additives at the minimum treat rate, power loss reduced to about 1.6%. At the maximum treat rate, the deposits were completely removed and power was restored.

Key advantages of using BHPetrol Infiniti Euro5 Diesel with the new additive at maximum treat rate include:

BHPetrol Infiniti Euro5 Diesel
is now available at

Check Out Station Locator

Restore Fuel Economy & Full Engine Power

NEW Infiniti Euro5 Diesel by BHPetrol is reformulated with the latest German additives that are specially engineered to restore fuel economy and engine power for common rail, direct-injection diesel engines. Its maximum dose rate treatment to restore full engine power, outperforms the OEMs’ requirements*.

You experience the same benefits when fuelling up on Infiniti 2M Diesel**.

* Original Equipment Manufacturers’ (OEMs) requirements stipulate that power loss must be less than 2%.

** Also treated with the new additives, which are equally effective for direct injection engines.

Why Modern Diesel Engines Need Infiniti Euro5 Diesel

Extreme temperature pressures in modern diesel engines form hard-to-remove deposits.

Deposits in the fuel injector alter fuel spray patterns set by OEMs, which cause low fuel economy and power loss.

Only additives engineered for modern diesel engines AND treated at maximum strength can restore full engine power.

First in Malaysia

In November 2014, BHPetrol became the first company in Malaysia to offer diesel that meets more stringent Euro5 standards. The availability of this much cleaner, ultra-low sulphur fuel offers motorists with modern common rail, direct injection diesel engines, the opportunity to enjoy peak engine performance and efficiency.

Whether a diesel engine is an old indirect injection, or the latest common rail direct injection type, the combustion process causes deposits to form over time. Additives in the fuel remove these deposits and maintain engine cleanliness by preventing further deposit build-ups.

Additive packages provide Clean Up (removal of existing deposits) and Keep Clean (removal of new deposits) properties depending on the amount of additives added to the fuel. Typically, additives applied at the manufacturer’s maximum treat rate provide both Clean Up and Keep Clean properties, and at minimum treat rate, only Keep Clean.

Infiniti Euro5 Diesel (B10)

Specially formulated to give better mileage with peak performance

Infiniti Diesel is formulated with BHPetrol’s German Diesel Performance Package containing a highly reactive key ingredient that effectively cleans out deposits in diesel engines and injectors. You get better mileage and cleaner running engines that emit less pollutants.

It also provides anti-corrosion protection and a foam inhibitor for easier fill-ups. Treated at the maximum recommended dosage, you also get peak performance every time you fuel up with Infiniti Diesel.

Cleaner

BHPetrol Infiniti Diesel is formulated to Euro 2M standard with less than 10ppm sulphur content so your diesel engine runs cleaner and emits less pollutants- a positive step towards improving the quality of our air.

Infiniti Diesel is treated at the maximum recommended dosage with peak performance German diesel additive formulation, specially designed to prevent deposit build-ups and leave you with a clean engine. 

German Diesel Performance Additives’ Package

Infiniti Diesel is treated with a Diesel Additive Formulation (DAF) specially formulated for fuel economy, engine protection and performance. It contains the following active ingredients:

Effective Detergent to Clean Engines

DAF contains a proprietary, highly reactive key ingredient which effectively cleans out deposits from the engine. Clean engines provide optimal combustion of diesel to give drivers higher fuel economy and power.

Corrosion Protection

DAF offers very effective protection against corrosion. It protects metallic parts such as fuel pipes and tanks from rust formation, and is an extremely effective corrosion inhibitor.

Foam Inhibitor

DAF contains foam inhibitor chemicals for easy diesel fill-ups.

FAQs: Infiniti Euro5 B10 Diesel & Infiniti B7 Diesel

B10 is diesel fuel blended up to 10 vol. % of PME. In Malaysia, the bio component that is blended with the mineral diesel is PME (Palm Methyl Ester) and it is derived from palm oil.
Diesel fuel has been blended with biodiesel at different volume percentages (vol. %) worldwide. In Malaysia, B10 is diesel fuel blended up to 10 vol. % of palm methyl ester and B7 is diesel fuel blended up to 7 vol. % of palm methyl ester.
Both Euro5 B7 diesel and Euro5 B10 diesel comply with Euro5 standards. However, we recommend that you check with your vehicle manufacturer to confirm if Euro5 B7 diesel or Euro5 B10 diesel is more suitable for your car.
Yes. The introduction of Euro5 is for a cleaner environment, it is not intended to impact the car performance. Various international standards have been developed for the biodiesel. For example, the ASTM (American Society for Testing and Materials) developed specifications to cover up to 20 vol. % of biodiesel, and the European Committee for Standardization (CEN) has published standards for B10 and B20. For suitability of usage, please refer to your vehicle manufacturer.
The introduction of the new Infiniti Euro5 Diesel B10 diesel is for a cleaner environment and is not intended to impact the performance of the vehicle.  However, we strongly recommend that you check with your vehicle manufacturer to confirm that the new Infiniti Euro5 Diesel B10 diesel can be used in your car.
Whilst both diesel grades are of Euro5 standard, we highly recommend that you check with your vehicle manufacturer to confirm that whether Euro5 B7 or Euro5 B10 diesel is most suitable for your car.
This should not be an issue. We strongly recommend that you refer to your vehicle manufacturer to check what is the best optimum service and maintenance requirements needed for your car’s engine to continue to run smoothly.
Whilst both diesel grades are of Euro5 standard, we strongly recommend that you refer to your vehicle manufacturer to check what is the best optimum service and maintenance requirements needed for your car’s engine to continue to run smoothly.
The introduction of the new Euro5 B10 diesel is for a cleaner environment and is not intended to impact the performance of the vehicle.Both Euro5 B7 and Euro5 B10 are compliant with Euro5 standards.
Euro 5 Standard for diesel is a continuation of improvement from the previous Euro Standards (Euro 4, Euro 3, etc). The primary criteria in formulating and designing the newer diesel standard is focused on reducing the emission of harmful substances for the ultimate aim of greener environment. For example, sulphur which is the main pollutant of diesel fuel has been reduced from 50ppm (Euro 4) to 10ppm (Euro 5).

Get to know
our other
products

Get to know
our other
products